hstfs sd6f8 6y5ri t8zs2 f747n dddz3 b6fzb 2bfth dn685 er347 n95e6 fh8i7 2n379 5yb9b kbsf9 hkr9b knbdt 7k56z 2sakn 9d8bd aresz EU: There is no threat of an immediate Russian attack on Ukraine |

EU: There is no threat of an immediate Russian attack on Ukraine

2022.01.25 08:55 magdy-abdelsalam-67 EU: There is no threat of an immediate Russian attack on Ukraine

submitted by magdy-abdelsalam-67 to ukraine_news [link] [comments]


2022.01.25 08:55 sunkissed5 Tf had sex with someone else while we were dating

My tf had sex with someone else while we were dating. And I just feel so bad about it. I feel like I wasn’t enough. We’re going to have a separation now because it’s all just so hard.
Do you guys have any similar experience and how did you deal with that?
submitted by sunkissed5 to twinflames [link] [comments]


2022.01.25 08:55 Lordofhisownroom how to get fancontrol to work - questions from a noob

so i tried my best do get fancontrol to work, but I just dont understand anything, below I copy pasted first my console, then the etc/fancontrol file that I thing did not get generated correctly, pls tell my what i should do different/now, to tell the fans when to start running and when to go full speed.
Thank you for your time and help:
lordofhisownpc@Main-Desktop ~]$ sudo pwmconfig
[sudo] password for lordofhisownpc:
# pwmconfig version 3.6.0+git
This program will search your sensors for pulse width modulation (pwm)
controls, and test each one to see if it controls a fan on
your motherboard. Note that many motherboards do not have pwm
circuitry installed, even if your sensor chip supports pwm.

We will attempt to briefly stop each fan using the pwm controls.
The program will attempt to restore each fan to full speed
after testing. However, it is ** very important ** that you
physically verify that the fans have been to full speed
after the program has completed.

Found the following devices:
hwmon0 is k10temp
hwmon1 is amdgpu
hwmon2 is nct6795

Found the following PWM controls:
hwmon1/pwm1 current value: 0
hwmon1/pwm1 is currently setup for automatic speed control.
In general, automatic mode is preferred over manual mode, as
it is more efficient and it reacts faster. Are you sure that
you want to setup this output for manual control? (n) y
hwmon2/pwm1 current value: 127
hwmon2/pwm2 current value: 75
hwmon2/pwm2 is currently setup for automatic speed control.
In general, automatic mode is preferred over manual mode, as
it is more efficient and it reacts faster. Are you sure that
you want to setup this output for manual control? (n) y
hwmon2/pwm3 current value: 153
hwmon2/pwm3 is currently setup for automatic speed control.
In general, automatic mode is preferred over manual mode, as
it is more efficient and it reacts faster. Are you sure that
you want to setup this output for manual control? (n) y
hwmon2/pwm4 current value: 147
hwmon2/pwm4 is currently setup for automatic speed control.
In general, automatic mode is preferred over manual mode, as
it is more efficient and it reacts faster. Are you sure that
you want to setup this output for manual control? (n) y
hwmon2/pwm5 current value: 0
hwmon2/pwm5 is currently setup for automatic speed control.
In general, automatic mode is preferred over manual mode, as
it is more efficient and it reacts faster. Are you sure that
you want to setup this output for manual control? (n) y

Giving the fans some time to reach full speed...
Found the following fan sensors:
hwmon1/fan1_input current speed: 4635 RPM
hwmon2/fan1_input current speed: 0 ... skipping!
hwmon2/fan2_input current speed: 2621 RPM
hwmon2/fan3_input current speed: 901 RPM
hwmon2/fan4_input current speed: 926 RPM
hwmon2/fan5_input current speed: 0 ... skipping!

Warning!!! This program will stop your fans, one at a time,
for approximately 5 seconds each!!!
This may cause your processor temperature to rise!!!
If you do not want to do this hit control-C now!!!
Hit return to continue:

Testing pwm control hwmon1/pwm1 ...
hwmon1/fan1_input ... speed was 4635 now 772
It appears that fan hwmon1/fan1_input
is controlled by pwm hwmon1/pwm1
Would you like to generate a detailed correlation (y)? n
hwmon2/fan2_input ... speed was 2621 now 2481
no correlation
hwmon2/fan3_input ... speed was 901 now 938
no correlation
hwmon2/fan4_input ... speed was 926 now 1014
no correlation

Testing pwm control hwmon2/pwm1 ...
hwmon1/fan1_input ... speed was 4635 now 4668
no correlation
hwmon2/fan2_input ... speed was 2621 now 2621
no correlation
hwmon2/fan3_input ... speed was 901 now 907
no correlation
hwmon2/fan4_input ... speed was 926 now 931
no correlation

No correlations were detected.
There is either no fan connected to the output of hwmon2/pwm1,
or the connected fan has no rpm-signal connected to one of
the tested fan sensors. (Note: not all motherboards have
the pwm outputs connected to the fan connectors,
check out the hardware database on http://www.almico.com/forumindex.php)

Did you see/hear a fan stopping during the above test (n)?

Testing pwm control hwmon2/pwm2 ...
hwmon1/fan1_input ... speed was 4635 now 4598
no correlation
hwmon2/fan2_input ... speed was 2621 now 984
It appears that fan hwmon2/fan2_input
is controlled by pwm hwmon2/pwm2
Would you like to generate a detailed correlation (y)? n
hwmon2/fan3_input ... speed was 901 now 914
no correlation
hwmon2/fan4_input ... speed was 926 now 934
no correlation

Testing pwm control hwmon2/pwm3 ...
hwmon1/fan1_input ... speed was 4635 now 4583
no correlation
hwmon2/fan2_input ... speed was 2621 now 2616
no correlation
hwmon2/fan3_input ... speed was 901 now 904
no correlation
hwmon2/fan4_input ... speed was 926 now 932
no correlation

No correlations were detected.
There is either no fan connected to the output of hwmon2/pwm3,
or the connected fan has no rpm-signal connected to one of
the tested fan sensors. (Note: not all motherboards have
the pwm outputs connected to the fan connectors,
check out the hardware database on http://www.almico.com/forumindex.php)

Did you see/hear a fan stopping during the above test (n)?

Testing pwm control hwmon2/pwm4 ...
hwmon1/fan1_input ... speed was 4635 now 4545
no correlation
hwmon2/fan2_input ... speed was 2621 now 2547
no correlation
hwmon2/fan3_input ... speed was 901 now 912
no correlation
hwmon2/fan4_input ... speed was 926 now 0
It appears that fan hwmon2/fan4_input
is controlled by pwm hwmon2/pwm4
Would you like to generate a detailed correlation (y)? n

Testing pwm control hwmon2/pwm5 ...
hwmon1/fan1_input ... speed was 4635 now 4576
no correlation
hwmon2/fan2_input ... speed was 2621 now 2616
no correlation
hwmon2/fan3_input ... speed was 901 now 895
no correlation
hwmon2/fan4_input ... speed was 926 now 938
no correlation

No correlations were detected.
There is either no fan connected to the output of hwmon2/pwm5,
or the connected fan has no rpm-signal connected to one of
the tested fan sensors. (Note: not all motherboards have
the pwm outputs connected to the fan connectors,
check out the hardware database on http://www.almico.com/forumindex.php)

Did you see/hear a fan stopping during the above test (n)?

Testing is complete.
Please verify that all fans have returned to their normal speed.

The fancontrol script can automatically respond to temperature changes
of your system by changing fanspeeds.
Do you want to set up its configuration file now (y)?
What should be the path to your fancontrol config file (/etc/fancontrol)?
Loading configuration from /etc/fancontrol ...

Select fan output to configure, or other action:
1) hwmon2/pwm4
2) hwmon2/pwm2
3) hwmon1/pwm1
4) Change INTERVAL
5) Just quit
6) Save and quit
7) Show configuration
select (1-n): 1

Devices:
hwmon0 is k10temp
hwmon1 is amdgpu
hwmon2 is nct6795

Current temperature readings are as follows:
hwmon0/temp1_input 25
hwmon1/temp1_input 23
hwmon2/temp1_input 29
hwmon2/temp2_input 26
hwmon2/temp3_input 28
hwmon2/temp4_input -128
hwmon2/temp5_input 30
hwmon2/temp6_input -3
hwmon2/temp7_input 25
hwmon2/temp8_input 0
hwmon2/temp9_input 0

Select a temperature sensor as source for hwmon2/pwm4:
1) hwmon0/temp1_input 3) hwmon2/temp1_input 5) hwmon2/temp3_input 7) hwmon2/temp5_input 9) hwmon2/temp7_input 11) hwmon2/temp9_input
2) hwmon1/temp1_input 4) hwmon2/temp2_input 6) hwmon2/temp4_input 8) hwmon2/temp6_input 10) hwmon2/temp8_input 12) None (Do not affect this PWM output)
select (1-n): 12

Select fan output to configure, or other action:
1) hwmon2/pwm4
2) hwmon2/pwm2
3) hwmon1/pwm1
4) Change INTERVAL
5) Just quit
6) Save and quit
7) Show configuration
select (1-n): 7

Common Settings:
INTERVAL=10

Settings of hwmon2/pwm4:
Depends on
Controls hwmon2/fan4_input
MINTEMP=
MAXTEMP=
MINSTART=
MINSTOP=

Settings of hwmon2/pwm2:
Depends on
Controls
MINTEMP=
MAXTEMP=
MINSTART=
MINSTOP=

Settings of hwmon1/pwm1:
Depends on
Controls
MINTEMP=
MAXTEMP=
MINSTART=
MINSTOP=


Select fan output to configure, or other action:
1) hwmon2/pwm4
2) hwmon2/pwm2
3) hwmon1/pwm1
4) Change INTERVAL
5) Just quit
6) Save and quit
7) Show configuration
select (1-n): 5

NOW THE FANCONTROL FILE

# Configuration file generated by pwmconfig, changes will be lost
INTERVAL=10
DEVPATH=
DEVNAME=
FCTEMPS=
FCFANS=
MINTEMP=
MAXTEMP=
MINSTART=
MINSTOP=
submitted by Lordofhisownroom to archlinux [link] [comments]


2022.01.25 08:55 nubbun69 major rosa

major rosa submitted by nubbun69 to Brawlstars [link] [comments]


2022.01.25 08:55 Post-Narrow Basically, the laws exist to protect the capitalist class

submitted by Post-Narrow to antiwork [link] [comments]


2022.01.25 08:55 cjweedy5299 Some pictures from my Instagram. Hope you guys enjoy them as much as I do !

submitted by cjweedy5299 to Aquariums [link] [comments]


2022.01.25 08:55 QUESTBUSINESS Business Analyst in Web Design

Business Analyst in Web Design submitted by QUESTBUSINESS to BusinessServicesBlog [link] [comments]


2022.01.25 08:55 sausageroll101 Used car < £5k Seat Ibiza vs Citroen C4

Hi guys
I have just got a new job and will need a car to get there (around 20miles roundrip on mainly country A road). I previously sold my beloved Mini because maintenance was EXPENSIVE so I'm looking for a slightly cheaper car that will be reliable and cheapish to maintain.
I've had a look at what's available and found these ones came up pretty often.
Does anyone have any experience with these cars?
SEAT Ibiza 2012/2013 1.4L SE SportCoupe 3dr Citroen C4 2012 1.6L VTi VTR+ 5dr
Also found Vauxhall Astra and Mazda2/Mazda3 in budget too.
Suggestions welcome!
Petrol only, must be ULEZ compliant and not a weak powerless buggy (looking at you 1.2 2006 Corsa).
submitted by sausageroll101 to CarTalkUK [link] [comments]


2022.01.25 08:55 KronosChronus Finally deciding to lose some weight and get fit.

but i am absolutely clueless to where to start.. I'm a 19 (turning 20 this year) year old male and last time i checked i weigh around 70-80kg but since you know, the holidays came by i might be beyond those numbers. i also have asthma so that adds to the reasons why i want to be fit. but where so i start? what food should i eat? my goal is to lose weight and build up some muscle. i do be lookin chubby and it messes up my confidence. can i have some help? willing to answer questions too. :))
submitted by KronosChronus to loseit [link] [comments]


2022.01.25 08:55 Mnky313 3rd screen replacement already having issues ‹2 months after install....

submitted by Mnky313 to note20ultra [link] [comments]


2022.01.25 08:55 fabbzinator Wolfhündin Ada, leidenschaftliche Dummyjägerin, Fährtensucherin, Mantrailerin und ich sagen ein Hallo in die Runde!

submitted by fabbzinator to hundeschule [link] [comments]


2022.01.25 08:55 Tickmill UK Data Soft Patch Continues

GBP traders have been hit by a further round of poor data this week. The latest PMI data sets for January, released yesterday, showed that both the manufacturing and services sector were weaker than expected over the month. The manufacturing PMI was seen falling back to 56.9, from the prior month’s 57.9 reading, falling short of the 57.7 reading the market was looking for. Similarly, the services sector PMI was seen falling back to 53.3 from the prior month’s 53.6 reading, undershooting expectations for a lift to 53.9.
submitted by Tickmill to Forexstrategy [link] [comments]


2022.01.25 08:55 audreyporter [Lowest Price Ever] Microsoft office 2021 Pro Plus only for $25 (Apply coupon:HNEWY22)

submitted by audreyporter to REDDITTBAY [link] [comments]


2022.01.25 08:55 iamdabrick How to fill the black? It used to be filled but idk what happened

How to fill the black? It used to be filled but idk what happened submitted by iamdabrick to geometrydash [link] [comments]


2022.01.25 08:55 Dr_Milchmixer Purify a lvl 40 to get a lvl 50?

Hello So I just caught a crypto Snorlax and want to push it to lvl 40. After I pushed my Snorlax, I want to purify it to get a lvl 50 Snorlax without using xl candys. Does anyone know if this is possible?
submitted by Dr_Milchmixer to pokemongo [link] [comments]


2022.01.25 08:55 TheGreat1743 Unsure how to feel about fiance and her cousins relationship. Thought anyone ?!

My fiance and her male second cousin have recently gotten aquainted a few months ago at a wedding. Growing up they only knew of each other but not really knowing each other well. However now they are snapping every day now. Spending nights talking and drinking at his house. Even staying the night at his house. And also planning trips together such as skiing. She has become distant towards me. She assures me he's a family figure and just enjoys hanging around him. To me this seem weird and excessive. Given the circumstances. I am totally unsure how to feel about it. But my gut feels like it's not right & there is some sexual tension between the two. After all it is legal and they've only recently became aquainted… I should also mention our relationship hasn't been great for a few months as well.
submitted by TheGreat1743 to relationship_advice [link] [comments]


2022.01.25 08:55 CallMehAl_x Trading psx for Amp or rhd!

I currently have 1 bil gems
and a few other pets (Tell me if you wanna see them)
submitted by CallMehAl_x to Cross_Trading_Roblox [link] [comments]


2022.01.25 08:55 Malprop I just wanna be healthy :(

submitted by Malprop to GymMemes [link] [comments]


2022.01.25 08:55 iOLIVERSON Demographic

View Poll
submitted by iOLIVERSON to criterion [link] [comments]


2022.01.25 08:55 Big-Significance-491 Juliana Bonde revela para Gentile

submitted by Big-Significance-491 to onlyxx10 [link] [comments]


2022.01.25 08:55 BeeBoth5486 Motivation

What is the most motivating moment you have faced in your entire life ?
submitted by BeeBoth5486 to Nepal [link] [comments]


2022.01.25 08:55 TyTheHusky I wanna know the really fun "out there" builds

There are just so many survivor perks in the game and just seeing iron will, DS, Dead hard, and borrowed time has gotten so old. I wanna play in a new way to try to make the game more fun for me again. I've really enjoyed Saboteur, Break Out, Lithe, and CoH lately but I wanna know more!

Let me hear those fun unheard of perk builds with like, Auto-didact or Up the Ante or Soul Survivor. Stuff like that!~
submitted by TyTheHusky to deadbydaylight [link] [comments]


2022.01.25 08:55 GeneralDiscontent Chimmarao vs leaf yerba mate: is there a caffeine buzz difference?

I am about to try Brazilian Chimmarao mate (ordering cultvadya medium cut).
I understand there is a difference in appearance and that it is less processed, but is there a caffeine difference? Do you get more of a caffeine buzz off this type?
My caffeine buzz varies wildly brand to brand with Argentinian style mate so I'm curious to hear about your experiences.
If you have any recommendations for a Brazilian brand I'd love to hear them too. I usually drink Taragui and Cruz de Malta, as I've found they give me the strongest buzz.
Thank you!
submitted by GeneralDiscontent to yerbamate [link] [comments]


2022.01.25 08:55 vanityofjay29 Grants Shapps promises to ‘set Britons free’ with easing of travel rules

submitted by vanityofjay29 to jaystravelogue [link] [comments]


2022.01.25 08:55 Adaptordie1776 In-Depth: San Diego company developing nasal drops to treat COVID

In-Depth: San Diego company developing nasal drops to treat COVID submitted by Adaptordie1776 to moderatepolitics [link] [comments]


http://lucevita24.ru